View ER2G_4526486.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ER2A thru ER2J
SURFACE MOUNT SUPERFAST RECTIFIER
CHENG- YI
ELECTRONIC
VOLTAGE RANGE -50 TO -600 VOLTS CURRENT -2.0 Amperes
SMB/DO-214AA
FEATURES
For surface mounted applications Low profile package Built-in strain relief Easy pick and place Superfast recovery times for high efficiency Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass passivated junction High temperature soldering: 260oC/10 seconds at terminals
.075(1.91) .083(2.11) .130(3.30) .155(3.94)
.160(4.06) .185(4.70) .006(.152) .012(.305)
.083(2.13) .096(2.44) .002(.051) .008(.203) .200(5.08) .220(5.59)
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band Standard Packaging: 12mm tape (EIA-481) Weight: 0.003 ounces, 0.093 gram
.030(0.76) .050(1.27)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, reistive or inductive load. For capacitive load, derate current by 20%.
SYMBOLS
ER2A
50 35 50
ER2B
100 70 100
ER2C
150 105 150
ER2D
200 140 200 2.0
ER2E
300 210 300
ER2G
400 280 400
ER2J
600 420 600
UNITS
V V V A
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, at TL=110 C
0
VRRM VRMS VDC I(AV)
Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 2.0A Maximum DC Reverse Current at Rated DC Blocking Voltage
@ TA=250C @ TA=1000C
IFSM VF IR TRR CJ R JL TJ , TSTG
50.0
A
0.95 5.0 150 35.0 25.0 20.0 -50 to +150
1.25
1.7
V
A nS
pF
0
Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Maximum Thermal Resistance (Note 3) Operating and Storage Temperature Range
C/W
0
C
Notes : 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0 MHZ and Applied Vr=4.0 volts. 3. 8.0mm2 (.013mm thick) land areas.
ER2A thru ER2J
SURFACE MOUNT SUPERFAST RECTIFIER
CHENG- YI
ELECTRONIC
RATING AND CHARACTERISTICS CURVES ER2A THRU ER2J
Fig. 1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM ES1A THRU ES1G
50 Noninductive 10 Noninductive
Fig. 2 - MAXIMUM AVERAGE FORWARD CURRENT RATING
AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 2.4 2.0 1.6 1.2 0.8 0.4 0 0 20 40 60 80 100 120 140 160
SINGLE PHASE HALF W AVE 60HZ RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.3x0.3"(8.0x8.0mm) COPPER PAD AREAS
trr
+0.5A
() PULSE GENERATOR NOTE 2
(+) 25 Vdc (approx) ()
D.U.T.
0 -0.25
1 NONInductive
OSCILLOSCOPE NOTE 1
(+)
NOTES:1. Rise Time=7ns max. Input Impedance=1 megohm. 22pF 2. Rise Time=10ns max. Source Impedance=50 Ohms.
-1.0 SET TIME BASE FOR 10ns/cm 1cm
LEAD TEMPERATURE, oC
Fig. 3 - TYPICAL REVERSE CHARACTERISTICS
1000
Fig. 4 - TYPICAL FORWARD CHARACTERISTICS
50.0
TJ=100C
0
100
INSTANTANEOUS FORWARD CURRENT, AMPERES
INSTANTANEOUS REVERSE CURRENT, MICROAMPERES
ER2A 10.0
10
TJ=750C
ER2E 1.0 ER2J
1.0
TJ=25 C
0
0.1
TJ=25 C
0
0.1
PULSE WIDTH=300 S 2% DUTY CYCLE
0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK INVERSE VOLTAGE, VOLTS
0.01 0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
Fig. 5 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
PEAK FORWARD SURGE CURRENT, AMPERES 60 60 50 50 40 30 20 10 10 1 2 5 10 20 50 100 0.1
8.3ms SINGLE HALF SINCE-WAVE JEDEC METHOD
Fig. 6 - TYPICAL JUNCTION CAPACITANCE
CAPACITANCE, pF
40 30 20
0 TJ=25C f=1.0MHZ Vslg=50mVp-p
NUMBER OF CYCLES AT 60Hz
0.5 1
5 10
20
50 100 200
500 1000
REVERSE VOLTAGE, VOLTS

▲Up To Search▲

Price & Availability of ER2G

	To Download ER2G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .